CHASSIS 6-65
MASTER CYLINDER REMOVAL AND
DISASSEMBLY
• Disconnect the front brake light switch lead wires.
• Place a rag underneath the union bolt on the master cylinder
to catch any spilt brake fluid. Remove the union bolt and dis-
connect the brake hose.
#
Immediately and completely wipe off any brake fluid
contacting any part of the motorcycle. The fluid reacts
chemically with paint, plastics and rubber materials, etc.
and will damage them severely.
• Remove the reservoir cap 1, insulator 2 and diaphragm 3.
• Remove the brake lever 4 and brake switch 5.
• Remove the master cylinder by removing the master cylinder
bolts.
To Next Page
Loading...
Need help?
General
