3-30 ENGINE
CYLINDER HEAD COVER
CAM POSITION SENSOR
• Install the oil seal 1 and cam position sensor 2.
NOTE:
When installing, clean the cam position sensor’s face.
! Cam position sensor bolt: 8 N
.
m (0.8 kgf
.
m, 5.8 lb-ft)
CAMSHAFT
CAMSHAFT IDENTIFICATION
The exhaust camshaft can be distinguished from that of the
intake by the embossed letters “EX” (for exhaust) as against
letters “IN” (for intake).
CAM WEAR
• Check the camshaft for wear or damage.
• Measure the cam height H with a micrometer.
[ 09900-20202: Micrometer (25 – 50 mm)
Cam height H:
Service Limit: (IN.) : 36.39 mm (1.433 in)
(EX.) : 34.98 mm (1.417 in)
To Next Page
Loading...
Need help?
General
