ENGINE 3-47
115 N
.
m
11.5 kgf
.
m
83.2 lb-ft
()
TRANSMISSION
• Disassemble the countershaft and drive shaft.
Pay attention to the following point.
[ 09900-06104: Snap ring pliers
• Remove the 6th drive gear circlip from its groove and slide it
towards the 3rd/4th drive gear.
• Slide the 6th 1 and 2nd 2 drive gears toward the 3rd/4th drive
gears, then remove the 2nd drive gear circlip 3.
1 Countershaft/1st drive gear
2 5th drive gear
3 3rd/4th drive gear
4 6th drive gear
5 2nd drive gear
6 Driveshaft
7 2nd driven gear
8 6th driven gear
9 3rd driven gear
0 4th driven gear
A 5th driven gear
B 1st driven gear
To Next Page
Loading...
Need help?
General
