ENGINE 3-33
CYLINDER HEAD AND VALVE
VALVE AND VALVE SPRING DISASSEMBLY
• Remove the tappets 1 and shims 2 by fingers or magnetic
hand.
#
Identify the position of each removed part.
• Using special tools, compress the valve springs and remove
the two cotter halves 3 from valve stem.
[ 09916-14510: Valve lifter
09916-14521: Valve lifter attachment (IN.)
09916-14530: Valve lifter attachment (EX.)
09916-84511: Tweezers
#
Be careful not to damage the tappet sliding surface with
the special tool.
• Remove the valve spring retainer 4 and valve springs 5.
• Pull out the valve from the other side.
To Next Page
Loading...
Need help?
General
