Suzuki GSX-R750K3 2003 User Manual

10-12 GSX-R750K1 (’01-MODEL)
CLUTCH
CLUTCH REASSEMBLY
DRIVE PLATE:
Identify drive plates, No. 1, No. 2 and No. 3 according to the fol-
lowing table.
DRIVE PLATE PART NO. IDENTIFICATION
No.1 21441-31E50 Purple paint
No.2 21441-31E60 Green paint
No.3 21440-35F00 Dampers
• No.3 drive plate claws have dampers 1 on claws.
DRIVEN PLATE:
Identify driven plates, No. 1 and No. 2, according to the following
table.
DRIVEN PLATE PART NO. THICKNESS
No.1 21451-31E00 1.6 mm (0.06 in)
No.2 21451-31E10 2.0 mm (0.08 in)
No.3 Drive Plate
Direction of outside
DRIVE PLATE:
A No.1 Drive Plate ...................................... 8 pcs.
B No.2 Drive Plate ...................................... 1 pc.
C No.3 Drive Plate ...................................... 1 pc.
DRIVE PLATE:
a No.1 Driven Plate ....................................6 – 8 pcs.
b No.2 Driven Plate ....................................1 – 3 pcs.
NOTE:
The No.2 Driven plate should be installed between first to third position from the pressure plate.

Suzuki GSX-R750K3 2003 Specifications

General

Displacement	749cc
Bore x Stroke	70.0 mm x 48.7 mm
Compression Ratio	12.0:1
Fuel System	Fuel injection
Starter	Electric
Final Drive	Chain
Front Brakes	Dual hydraulic disc
Rear Brakes	Single hydraulic disc
Front Tire	120/70-ZR17
Rear Tire	180/55-ZR17
Dry Weight	163 kg (359 lbs)
Engine Type	4-stroke, DOHC
Ignition	Electronic ignition (transistorized)
Transmission	6-speed, constant mesh
Front Suspension	Inverted telescopic, coil spring
Rear Suspension	Link type
Ground Clearance	130 mm (5.1 inches)
Seat Height	825 mm (32.5 in)
Fuel Capacity	18 L (4.8 US gal)