Sym PA12B User Manual

To this chapter contents
2. Maintenance Information
Periodical Maintenance Schedule
NO
Items
Initial
300KM
1 month or
every
1000KM
3 months or
every
3000KM
6 months or
every
6000KM
1 year or
every
12000KM
1
☆Air filter element
I C C R
2
☆AICV filter
I C C R
3
☆Gasoline filter
I I R
4
☆Engine oil filter
C C C
5
☆Engine oil replacement
R Exchange every 1000 km
6
Tire pressure
I I
7
Battery Inspection
I I
8
Brake lever free play check
I I
9
Steering handle integrity check
I I
10
Shock absorber performance check
I I
11
Bolts tightening check
I I
12
Check the engine for oil leakage
I I
13
☆Spark plug inspection or replacement
I I R
14
☆Change gear oil
R Exchange every 5000 km
15
Lubrication of the whole bike
L
16
Exhaust pipe
I I
17
☆Ignition timing
I I
18
☆Idle emission check
A I A
19
☆Throttle operation
I I
20
☆Engine bolts torque
I I
21
☆Transmission / Chain
I I/L R
22
☆Clutch free play inspection
I I
23
Light/ electrical system/ instrument readings.
I I
24
Main stand/ side stand springs.
I I
25
Fuel lines
I I
27
Cam chain
I I
28
☆Valve clearance
I A
29
☆PCV system integrity
I C
30
☆Crankcase blow-by over-flow pipe
I Drain every 2000km
31
☆Second air injection system (filter)
I I C
32
☆E.E.C. Device check
I
Note：I- inspection A- Adjust R- Replace C-Clean L-Lubrication
Please have your periodical maintenance data recorded by your SYM Authorized Dealer to maintain the motorcycle in excellent
condition. The above maintenance schedule is established by taking the monthly 1,000 kilometers as a reference. Whichever-
time or mileage- comes first will be regarded as an index for maintenance.
Remark：These marks “☆” in the schedule are emission control items. According to EPA regulations, these item checks
must be performed periodically following the use r manual instructions. It’s prohibited to adjust or repair
these emission control items by unauthorized people. Otherwise, SYM is no responsible.
1. Clean or replace the air cleaner element more often when the motorcycle is operated on dusty roads or in the
Heavily- polluted environment.
2.
Maintenance should be performed more often if the motorcycle is frequently operated in high speed and after the
motorcycle has accumulated a higher mileage.
3. Preventive maintenance：
a. Ignition system－Perform maintenance or check when continuous abnormal ignition, misfire, after-burn, overheating occur.
b. Carbon deposit removal－Remove carbon deposits in cylinder head, piston heads, exhaust system when power is decreasing.
c. Replace worn out pistons, cylinder head.
2-2

Sym PA12B Specifications

General

Brand	Sym
Model	PA12B
Category	Motorcycle
Language	English