To this chapter contents
3、Fuel System
Air Cleaner
3-13
Remove the air filter cover
(Screw x 5, bolt x 1)
Remove the air filter element.
Remove the air filter holding plate and take
out the air filter element. (Screw×1)。
Wash the air filter element with non-flammable
or high flash-point solvent. (Like kerosene or
diesel)
After washing, squeeze it and dump into motor
oil, and squeeze again.
Install the holding plate and the air filter cover
If the element is too dirty or damaged, please
change a new one.
Caution
y Don’t use gasoline or other flammable
solvents to clean the element.
Screw ×5
Installation
Install as reverse order of removal.。
Bolt×1
Cleanse
Screw×1
Air filter
element
Squeeze
Dump Engine Oil
Squeeze
To Next Page
Loading...
Need help?
General
