EasyManuals Logo
Home>Takeuchi>Excavators>TB260

Takeuchi TB260 User Manual

Takeuchi TB260
305 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #139 background imageLoading...
Page #139 background image
3-5
OPERATION
WARMING UP THE ENGINE
IMPORTANT: Avoid racing the engine until
it has warmed up.
Do not warm up the engine for a long time
(20 minutes or more). When idling is
required, occasionally place a load or run
the engine at medium speed.
1. Return the throttle controller, and then run
at a low idle with no load for 5 minutes.
STARTING AND STOPPING THE ENGINE
STOPPING THE ENGINE
IMPORTANT: Do not stop the engine
suddenly when operating with heavy
loads or at the maximum speed. Doing so
may cause the engine to overheat or
seize. Never stop running the engine
suddenly except in emergency.
1. Return the throttle controller.
2. Idle the engine for about 5 minutes to
gradually let it cool.
3. Turn the starter key to the OFF position to
stop the engine.
Note: The glow lamp turns on if the coolant
temperature is low after the engine is started.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Takeuchi TB260 and is the answer not in the manual?

Takeuchi TB260 Specifications

General IconGeneral
BrandTakeuchi
ModelTB260
CategoryExcavators
LanguageEnglish

Related product manuals