3-11
OPERATION
When the dozer blade is in front of the
operator’s seat:
To move forward:
Tilt the levers forward.
To move backward:
Tilt the levers backward.
OPERATING THE MACHINE
When the dozer blade is behind the
operator’s seat:
To move forward:
Tilt the levers backward.
To move backward:
Tilt the levers forward.
Traveling in 2nd (High) speed
When a load greater than a set value is
applied during traveling in 2nd (high)
speed, the speed will automatically slow
down to 1st (low) speed. When the load
becomes lighter, the speed will increase
and return to 2nd (high) speed. It should
be noted that the travel speed changes
depending on the load condition (for
machines with the automatic travel shift-
down system).
Press the travel speed switch to set to the
2nd (high) speed, and press it again to return
to the 1st (low) speed.
To Next Page
Loading...
Need help?
General
