Technicolor CGA4131COM User Manual

CBR CGA4131COM- User Guide
28 of 61
3 Admin Tool
Introduction
The Admin Tool allows you to configure the settings of your Gateway via your web browser, using a computer or
device that is currently connected to you Gateway (either wired or wirelessly).
Requirements
JavaScript must be enabled on your browser (this is the default setting). For more information, consult the help of
your web browser.
Accessing the Admin Tool
Proceed as follows:
1. Open your web browser and go to http://10.1.10.1, using a computer or device that is currently connected
to you Gateway (either wired or wirelessly).
On Windows, it is also possible to access the Admin Tool using UPnP. For more information, see
“6.1.1 UPnP”.
10.1.10.1 is the default IP address of the Gateway. If at some point you changed the IP address of
the Gateway, use the new IP address instead.
2. The Gateway prompts you to enter the username and password. Enter your user name (default:
cusadmin) and password (default: highspeed) and click OK.
3. The Admin Tool appears.

Technicolor CGA4131COM Specifications

General

Brand	Technicolor
Model	CGA4131COM
Category	Wireless Router
Language	English