CBR CGA4131COM- User Guide
37 of 61
4.2 How to start a WPS session via the Admin Tool
Adding a wireless client using WPS PBC
1. Make sure that the WPS button of your wireless client is accessible. This button can be a hardware
button or a software button.
2. Go to the Admin Tool (http://10.1.10.1), using a computer or device that is currently connected to your
Gateway (either wired or wirelessly). For more information, see “Accessing the Admin Tool”.
3. On the Gateway menu, click Connection and then click WiFi.
4. The WiFi page appears, click ADD WIFI PROTECTED SETUP (WPS) CLIENT.
5. The Add WiFi Client page appears.
6. Click PAIR.
7. Within two minutes, press the PAIR button of your wireless client.
Adding a wireless client using WPS PIN entry on the wireless client
1. Go to the Admin Tool (http://10.1.10.1), using a computer or device that is currently connected to your
Gateway (either wired or wirelessly). For more information, see “Accessing the Admin Tool”.
2. On the Gateway menu, click Connection and then click WiFi.
3. The WiFi page appears, click ADD WIFI PROTECTED SETUP (WPS) CLIENT.
4. The Add WiFi Client page appears.
To Next Page
Loading...
Need help?
General
