Technicolor CGA4131COM User Manual

CBR CGA4131COM- User Guide
44 of 61
 Block All to block all devices by default. In this case you must create a rule for each device that you
want to allow on your network.
Adding allowed devices
If you selected Block All in the Access Type list, proceed as follows:
1. In the Allowed Devices table, click +ADD ALLOWED DEVICE.
2. The Add Device to be Allowed page appears.
3. Under Set Allowed Device, select your device from the Learned Device(s) list. If your device is not
listed, enter the computer name and MAC address under Custom Device.
4. If you want this rule only to be applied at specific time frames, click No in the Always Allow list and
define when to apply the rule:
 Under Set Allow Time, enter a start time and end time.
 Under Set Allow Days, select the days for which the selected block time should be applied.
If you want to have different time schedules depending on the day, you must group them in
separate rules:
 One rule for weekdays (for example, allow the device from 10:00 PM until 8:00 PM).
 One rule for the weekend (for example, allow the device from 10:00 PM until 8:00 AM).
5. Click SAVE.
Adding blocked devices
If you selected Allow All in the Access Type list, proceed as follows:
1. In the Blocked Devices table, click +ADD BLOCKED DEVICE.
2. The Add Device to be Blocked page appears.
3. Under Set Blocked Device, select your device from the Learned Device(s) list. If your device is not
listed, enter the computer name and MAC address under Custom Device.
4. If you want this rule only to be applied at specific time frames, click No in the Always Block list and
define when to apply the rule:
 Under Set Block Time, enter a start time and end time.
 Under Set Block Days, select the days for which the selected block time should be applied.
If you want to have different time schedules depending on the day, you must group them in
separate rules:
 One rule for weekdays (for example, block the device from 8:00 PM until 10:00 PM).
 One rule for the weekend (for example, block the device from 8:00 AM until 10:00 PM).
5. Click SAVE.
5.1.4 Reports
Introduction
The Reports page allows you to generate reports on possible infringements of the parental control rules.
Procedure
1. Go to the Admin Tool (http://10.1.10.1), using a computer or device that is currently connected to your
Gateway (either wired or wirelessly). For more information, see “Accessing the Admin Tool”.
2. On the Content Filtering menu, click Reports.
3. The Report page appears.

Technicolor CGA4131COM Specifications

General

Brand	Technicolor
Model	CGA4131COM
Category	Wireless Router
Language	English