CBR CGA4131COM- User Guide
4 of 61
2 This device must accept any interference received, including interference
that may cause undesired operation.
RF-exposure statement
When the product is equipped with a wireless interface, then it becomes a
mobile or fixed mounted modular transmitter and must have a separation
distance of at least 20 cm (8 inches) between the antenna and the body of
the user or nearby persons. In practice, this means that the user or nearby
persons must have a distance of at least 20 cm (8 inches) from the modem
and must not lean on the modem in case it is wall-mounted. With a
separation distance of 20 cm (8 inches) or more, the M(aximum)
P(ermissible) E(xposure) limits are well above the potential this module is
capable to produce. For operation within 5.15 ~ 5.25GHz frequency range,
it is restricted to indoor environment. This device meets all the other
requirements specified in Part 15E, Section 15.407 of the FCC Rules.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Restricted frequency band
This product is equipped with an IEEE802.11b/IEEE802.11g/IEEE802.11n
wireless transceiver and may only use channels 1 to 11 (2412 to 2462
MHz) on U.S.A. territory.
To Next Page
Loading...
Need help?
General
