Tektronix WFM6120 User Manual

Installation
Installation
Your instrument is shipped in a wrap-around chassis that covers the instrument bottom and two sides. A cover is installed on
the chassis and the rear panel is made up of the module rear panels. You can operate the instrument in the chassis (be sure
the top cover is on) or installed in an approved portable cabinet or rack adapter. You can also custom install your instrument.
To install your instrument in a c abinet or rack, follow the instructions that are included with the optional accessory kits
that are available for each type of installation.
CAUTION. Do not install this instrument in any cabinet except those that are listed in the Accessories table. Attempting to
do so can damage the instrument and the cabinet.
If you install your instrument in a custom application, such as a console, be sure to provide adequate airflow. Do not
block the ventilating holes.
CAUTION. Failure to provide adequate airflow to the instrument could cause the instrument to shut down. If the airflow is
blocked and the instrument does not shut down, the instrument could be seriously damaged.
Before Installation
Unpack the instrument and check that you have received all of the items listed as standard accessories. You may want to
save the shipping carton and packing materials (including the anti-static bag) in case you need to ship the instrument.
Accessories
The table below shows which items are standard accessories and which items are optional accessories. Check the Tektronix
Web site (www.tektronix.com) for the most current information on accessories.
Accessory Standard Optional
Tektronix part
number
WFM6120, WFM7020, and WFM7120 Waveform Monitors Quick
Start User Manual
●
071-2223-XX
WFM6120, WFM7020, and WFM7120 Waveform Monitors Release
Notes
●
077-0226-XX
WFM6120, WFM7020, and WFM7120 Waveform Monitors Product
Documentation CD
This CD contains the following documents in PDF format. (All
documents are in English unless noted otherwise):
Quick Start User Manual (English, Japanese, Chinese)
Technical Reference
Specifications and Performance Verification Technical Reference
●
063-4055-XX
Power Plug
NOTE. See the International Power Plugs list that follows this table
for the type of power plug included with your instrument.
●
Not applicable
Waveform Monitors Quick Start User Manual 1

Tektronix WFM6120 Specifications

General

Brand	Tektronix
Model	WFM6120
Category	Monitor
Language	English