Checking Gamut
Automating Gamut Checks
You can use alarms to automatically monitor for out of gamut conditions:
1. Press the CONFIG button to display the
Configuration menu.
2. Use the left/right arrow keys and SEL
button to select Alarms and then Video
Content.
3. Use the up/down arrow keys to move
to each the alarm that you want to set.
Press SEL button to toggle the alarm on
(X)oroff.
4. When you have configured the Alarms
as you want them, move to the Select
here box and select it.
5. Check that Enable Alarms is set to On
in the Alarms m enu before leaving the
Alarms menu.
NOTE. For information on Alarms, press the
HELP button while Alarms is selected in the
configuration menu.
6. Press CONFIG to exit the m enu.
50 Waveform Monitors Quick Start User Manual
To Next Page
Loading...
Need help?
General
