Tektronix WVR6020 Quick Start Manual

Preface
Preface
This manual describes the installation and bas ic operation of the following instruments:
WVR6020
WVR7020
WVR7120
WVR6100 with Option MB
WVR7000 with Option MB
WVR7100 with Option MB
Key Features
Tektronix waveform rasterizers can help you monitor and measure SD SDI, HD SDI, and/or composite analog signals. All
instrument models come standard with SD SDI input monitoring capabilities. The following table includes key features
availableons
tandard equipped instruments. If a feature requires a specific option, the required option is noted.
Feature Description
FlexVu™ display
The FlexVu™ display is a four-tiled, high-resolution XGA display that provides four
concurrent v
iews of a monitored signal. The instrument also provides the flexibility to
configure each of the four display tiles independently, enabling you to quickly check
the integrity of a signal. For instruments with the simultaneous input monitoring
(Option SIM
) capability, the F lexVu™ display allows for the monitoring of two signals
at the same time, dividing the display into two sides: one for each signal.
Presets
Customizable presets allow you to quickly save and recall commonly used
configurations.
Digital and analog support
Support for digital applications. Analog support is available with optional
composite
-analog monitoring (Option C PS).
Fully digital processing
Fully Digi
tal Processing allows for accurate, repeatable, drift-free operation that
surpasses traditional analog designs.
Waveform display Traditional waveform disp lays allow signals to be overlaid or paraded.
Vector dis
play
Vector display with Composite and Component Compass Rose Graticules, as
well as gain, sweep, and magnification controls. Traditional and Lightning Vector
displays
are available. The latter visualizes both luma and chroma amplitudes,
as well as quantify inter-channel timing.
Gamut m onitoring Arrowhead, Diamond, and Split Diamond displays offer user-selectable gamut
thresholds so that you can set monitoring limits appropriate to a specific operation.
Gamut mo
nitoring is fully integrated with the ala rm logging and reporting capabilities.
Timing a
nd LTC waveform displays
Longitu
dinal Time Code (LTC) is monitored in a frame rate display to allow
observation of amplitude, synchronization and phase with respect to reference
vertical interval time code (VITC).
Waveform Rasterizers Quick Start User Manual ix

Tektronix WVR6020 Specifications

General

Brand	Tektronix
Model	WVR6020
Category	Measuring Instruments
Language	English