Checking Gamut
Automating Gamut Checks
You can use alarms to automatically monitor for out of gamut conditions:
1. Press the CO NF IG button to display the
Configuration menu.
2. U se the left/right arrow keys and SEL
button to select Alarms and then Video
Content.
3. Use the up/down arrow keys to move
to each the alarm that you w ant to set.
Press SEL button to toggle the alarm on
(X)oroff.
4. When you have configured the Alarms
as you want them, move to the Select
here box and select it.
Waveform Rasterizers Quick Start User Manual 51
To Next Page
Loading...
Need help?
General
