User’s Manual 8-15
Using the Remote Controller, Front operation button and QosmioPlayer
Connecting the set-top box
1. Connect the VIDEO-IN cable that is found in the bundled package to
the computer.
2. Insert the output cable plug for connecting to the set-top box to the
audio input terminals (red: audio right, white: audio left) and the video
input connector (yellow) of the VIDEO-IN cable.
3. Connect the other end of the output cable plug to the output terminals of
the set-top box.
Figure 8-12 Connection method for the computer and set-top box in MCE model
Starting for watch the TV
Perform the following procedures to watch TV.
1. Activate Media Center.
2. Activate MV TV.
For details on operating method, refer to the Help in Media Center.
Use the bundled VIDEO-IN cable and connect to
VIDEO-IN port on the right side of the computer.
CATV cable
(sold separately)
Coaxial cable
(sold separately)
AV cable
(sold separately)
Image data cannot be imported, edited, watched or saved to DVD by
connecting the Media Center Edition model to external devices such as
TV, video deck or analog video camera.
To Next Page
Loading...
Need help?
General