User’s Manual 7-3
HW Setup
Boot Priority
Boot Priority Options
This option sets the priority for booting the computer. Select from the
following settings:
"HDD" here refers to the Built-in HDD that is defined in the HDD Priority
Option so that it should be recognized first.
You can override the settings and manually select a boot device by
pressing one of the following keys while the computer is booting:
*1
Floppy disk drive is looked for when the boot disk is contained in external
floppy disk drive.
*2
In this computer, CD-ROM refers to the Fixed Optical Disk Drive.
*3
Only the model with two HDDs is supported.
To change the boot drive, follow the steps below.
1. Hold down F12 and boot the computer.
HDD −> FDD −> CD-
ROM −> LAN
The computer looks for bootable files in the
following order: HDD, floppy disk drive*
1
, CD-
ROM*
2
and LAN (Default).
FDD −> HDD −> CD-
ROM −> LAN
The computer looks for bootable files in the
following order: floppy disk drive*
1
, HDD, CD-
ROM*
2
and LAN.
HDD −> CD-ROM −>
LAN −> FDD
The computer looks for bootable files in the
following order: HDD, CD-ROM*
2
, LAN and
floppy disk drive*
1
.
FDD −> CD-ROM −>
LAN −> HDD
The computer looks for bootable files in the
following order: floppy disk drive*
1
, CD-ROM*
2
,
LAN and HDD.
CD-ROM −> LAN −>
HDD −> FDD
The computer looks for bootable files in the
following order: CD-ROM*
2
, LAN, HDD, floppy
disk drive*
1
.
CD-ROM −> LAN −>
FDD −> HDD
The computer looks for bootable files in the
following order: CD-ROM*
2
, LAN, floppy disk
drive*
1
and HDD.
U Selects the USB floppy disk drive.
N Selects the network.
1 Selects the primary HDD.
2
Selects the primary HDD2
*3
.
C
Selects the CD-ROM
*2
.
To Next Page
Loading...
Need help?
General