9-22 User’s Manual
Optional Devices
Connection via the D-Video out port
1. Plug one end of the D-Video out cable into the D-Video out port of your
computer.
Figure 9-22 Connecting the D-Video out port
2. Insert the other end of the D-Video out cable into the video input
terminal of the TV set (Use your computer's speakers or a headphone
to get sound. Connect the headphone to the computer’s headphone
jack).
Settings for display video on TV
To view video on the TV set, be sure to configure the following settings
otherwise you may find that nothing is displayed.
Setting for nVIDIA GeForce Go 7300 model or GeForce Go
7600 model
If a television is connected to the computer, set the TV type in Display
Properties. Follow the steps below.
1. Click start and click Control Panel.
2. Double-click the Display icon to open the Display Properties window.
3. Click the Settings tab and click the Advanced button.
4. Click the GeForce Go 7300 tab or GeForce Go 7600 tab, click Current
display and select TV.
5. Click Device Settings.
6. Select the Select TV format and select the format that your TV
supports.
D-Video out port
■ Be sure to use the Fn + F5 HotKey to select the display device before
starting to play video. Do not change the display device while playing
video.
■ Do not change the display device under the following conditions.
■ While data is being read or written
■ While communication is being carried out
To Next Page
Loading...
Need help?
General