8-16 User’s Manual
Using the Remote Controller, Front operation button and QosmioPlayer
Connecting the VIDEO-IN port
This port allows you to import video data from analog video cameras or
video decks by connecting your computer to this type of device. Imported
video can be edited or written to a DVD disk.
1. Insert one end of the VIDEO-IN cable into the VIDEO-IN port of your
computer.
Figure 8-13 Connecting the VIDEO-IN port
2. Insert the other end of the VIDEO-IN cable into the output port of the
analog device you wish to connect. To hear sounds, use a video cable
to connect the sound terminals of the audio device and your computer
(red: sound, right channel, white: sound, left channel).
QosmioPlayer
QosmioPlayer is a quick play feature that enables users to perform TV,
DVD and CD playback, as well as AV input (image and voice data) without
using Windows. QosmioPlayer is provided with some models.
To use the QosmioPlayer feature, some settings must be specified. For
more information on how to configure, refer to the chapter on the
QosmioPlayer Setting in the User’s Manual.
Front operation button function
This section describes the functions of the front operation button for
QosmioPlayer mode.
VIDEO-IN port
When playing a DVD video with recorded data from the TV on Play DVD in
the Media Center, pushing the Skip button on the Remote Controller while
the last chapter is playing may result in the Media Center freezing.
If this occurs, end ehshell.exe from the process tab in task manager.
Please do not press the button too strenuously.
To Next Page
Loading...
Need help?
General