TP-Link Touch P5 AC1900 User Manual

85Chapter 4 . Congure Touch P5 as an Access Point
Congure Touch P5 as an
Access Point
This chapter introduces how to connect and configure your Touch P5 in access point mode which will
transform your existing wired network to a wireless network. We recommend that you use access point mode
when your wireless devices need to access to a wired network, or when you require a supplement of ports for
your wired router.
Your Touch P5 supports two configuration methods: Web-based utility and Touchscreen utility. Web-based
utility includes the configuration for all functions, and it requires a connection (wired or wireless) between
your Touch P5 and the device you are using to log into the web-based management page. Touchscreen
utility supports configuration for most commonly used function, and the configuration can be easily done
within a few taps on the touchscreen.
In this chapter, we will introduce most of the configuration through the touchscreen utility.
4

TP-Link Touch P5 AC1900 Specifications

General

Color	black
Frequency Band	2.4 ghz, 5.0 ghz
QoS Traffic Prioritization	yes
Ethernet Standard	10/100/1000
Ethernet Switch	yes
Wireless Standard	ac
Gigabit Ethernet Speed	yes
Antennas	3
Parental Control	yes
Firewall	other
Data Encryption	yes
Encryption Type	wep
Ports	rj-45
WAN Ports	1
Built In Modem	no
System Requirements	microsoft windows 98se, nt, 2000, xp, vista™ or windows 7, 8, 8.1, mac os, netware, unix or linux; internet explorer 11, firefox 12.0, chrome 20.0, safari 4.0, or other java-enabled browser

Weight and Dimensions

Height	2.1 inches
Width	11.2 inches
Net Weight	2.98 pounds