OM 25-3503 us – Edition 4.1 * 2503_3503b330.fm 3-45
Operation
Shatter protection (option)
Danger of piercing/penetration by objects from the front!
Causes serious injury or death.
• A shatter protection must be installed on a canopy version if an attachment
(for example a hammer) causes fragments to fly around. This shatter pro-
tection takes over the function of a front window. If the machine is equipped
with a cabin, the front window must be closed during hammer operation.
• Pay attention to the restricted work range (see fig. 117 and 118).
• Machine operation is prohibited without a shatter protection.
Accident hazard in conditions of restricted visibility due to rain, snow-
fall, dust, etc.!
Causes serious injury or death.
☞ Stop machine operation immediately.
Information!
The shatter protection (canopy option) protects the driver against fragments from
the front.
• The machine owner must ensure that the hazard situation is evaluated and that
the national regulations are observed.
• The machine owner must ensure that only work is performed that does not
require any higher protection.
• Accidents cannot be fully avoided despite equipping a machine with protective
structures.
Information!
Do not use brushes, steel wool or other abrasive cleaners for cleaning the polycar-
bonate disk. Do not wipe dust in a dry state.
Information!
Only a Wacker Neuson service center may install the shatter protection for the first time.
To Next Page
Loading...
Need help?
General
