5-32 OM 25-3503 us – Edition 4.1 * * 2503_3503b530.fm
Maintenance
Powertilt (option 3503)
Perform maintenance on the Powertilt unit once a day with the other maintenance for the
machine.
Perform visual checks for possible malfunctions, damage or cracks.
Remove all dirt on and around moving parts.
Apply grease via grease zerks S.
Lubrication points of hydraulic quickhitch (option)
Information!
Before picking up an attachment, the operator must ensure that it can be
hitched correctly by removing all dirt on either claw of the quickhitch.
Perform maintenance on the quickhitch once a day with the other maintenance
for the machine.
Perform visual checks for possible malfunctions, damage or cracks.
Remove all dirt on and around moving parts.
The claws must be clean and slightly greased.
Apply grease to the pins via grease zerks S.
Apply grease to the friction surfaces of the lock mechanism via 2 further grease zerks N on
either side of the quickhitch (see Fig. 303).
Before starting work, check the acoustic signal. which must be audible when pressing
switch 50.
Fig. 302: Lubricate
S
Fig. 303: Lubrication
S
S
N
To Next Page
Loading...
Need help?
General
