2-18 OM 25-3503 us – Edition 4.1 * * 2503_3503b210_us.fm
Safety instructions
• Hydraulic and compressed-air lines must be laid and fitted properly. Ensure that no
connections are interchanged. The fittings, lengths and quality of the hoses must
comply with the technical requirements.
Noise
• Close all doors and windows if practical.
• Removing sound baffles on the machine during operation is not allowed.
• Wear ear protectors. This is especially important when performing hammer operations
or working in enclosed areas.
MSDS
• When handling oil, grease and other chemical substances such as battery electrolyte or
hydraulic fluid, observe the product-related safety regulations (Material Safety Data
Sheet (MSDS)).
• Be careful when handling hot consumables – risk of burning or scalding.
• When using the machine in contaminated areas, take appropriate measures for the
protection of the operator and the machine.
Tracks
• Check track tension at regular intervals.
• Repair work on the tracks must be performed by technical personnel or by Wacker
Neuson dealers only.
• Damaged or malfunctioning tracks reduce the machine’s operational safety. Check the
tracks regularly for:
• Cracks, cuts or other damage.
• Check track tension at regular intervals.
To Next Page
Loading...
Need help?
General
