OM 803 us – Edition 3.7 * 803b330.fm 3-37
Operation
Seat belt (option)
Seat belt (up to serial no. AI01200)
Injury hazard when operating the machine without fastening
the seat belt!
Can cause serious injury or death.
• Operating the machine without fastening the seat belt is prohibited under
any circumstances.
• Seat belt must not be twisted.
• The seat belt must run over the hips – and not over the stomach.
• Do not place the seat belt over hard, edged or fragile items (tools, rulers,
glasses, pen) carried inside your clothes.
• Never buckle up 2 persons with one seat belt.
• Check the seat belt condition regularly. Have damaged parts immediately
replaced by a Wacker Neuson service center.
• Always keep the seat belt clean, as coarse dirt can impair proper functioning.
• Seat belt buckle must not be obstructed by foreign bodies, otherwise the
buckle latch cannot lock into place.
• Depending on the situation, traveling over very short distances with a low-
ered rollbar is allowed (in case of low clearance heights, for example)
– see chapter Operation with lowered ROPS rollbar on page 2-9
– see chapter Operation with lowered TOPS rollbar (up to serial no.
AI00966) on page 2-9.
After an accident the belt strap is stretched and no longer serviceable. In an
accident, the seat belt does not provide enough safety!
• Replace the seat belt after an accident.
• Have fastening points and seat fixture checked for bearing capacity.
To Next Page
Loading...
Need help?
General
