Overview Service Menu
Vital Signs Monitor Series 300 15 Service Manual
Service Menu
To see the service menu, first power the monitor off. Press and hold for 3 seconds. While
is depressed, press . The monitor displays the message Service Mode, runs a self-test,
and then displays the main software version number (M: 1.00.00). Press repeatedly to
cycle to the menu selection of interest.
SYS
DIA
/min
SpO
2
%
Main SW version
M: X.XX.XX
NIBP SW version
N:XX.XX.XX
SpO
2
SW version
S:X.X.X.X
Temperature SW version
T:X.X
NIBP TEST
BATTERY:X.XX V
BP CYCLES:XXXXXX
RUN TIME:XXXXX
YES
RESET TO DEFAULT
NO
POWER OFF
Exit Service Mode
SERVICE MODE
Power-up Self-test
3 seconds
To Next Page
Loading...
Need help?
General
