Xerox Color 550/560 Printer
User Guide
10
Safet
y
Emergency Power Off
If any of the following conditions occur, turn off the printer immediately and disconnect the power cable from the
electrical outlet. Contact an authorized Xerox Service Representative to correct the problem:
The printer emits unusual odors or makes unusual noises.
A wall panel circuit breaker, fuse, or other safety device has been tripped.
The power cable is damaged or frayed.
Liquid is spilled into the printer.
Any part of the printer is damaged
The printer is exposed to water.
Telephone Line Cord
CAUTION:
To reduce the risk of fire, use only No. 26 American Wire Gauge (AWG) or larger telecommunication line cord.
Laser Safety
This printer complies with laser printer performance standards set by governmental, national, and international
agencies and is certified as a Class 1 Laser Product. The printer does not emit hazardous light because the
beam is totally enclosed during all modes of customer operation and maintenance.
WARNING:
Use of controls, adjustments, or performance of procedures other than those specified in this manual can result
in hazardous radiation exposure.
To Next Page
Need help?
General