Xerox 560 User Manual

Scannin
g
Xerox Color 550/560 Printer
User Guide
213
Scanning to a Computer
The Scan to PC feature allows you to scan a document to your computer.
Note:
This feature must be enabled by your system administrator.
To use the Scan to PC feature:
Load the original on the document glass or in the document feeder.
1.
On the printer control panel, press the Services Home button.
2.
Touch Scan to PC.3.
Touch Transfer Protocol, then touch FTP, SMB or SMB (UNC Format), then touch Save.4.
Touch Server, Save in, User Name and Password. For each setting, using the touch screen keyboard, enter
the data. Touch Save.
5.
Note:
If the server name was previously stored, touch Address Book, touch the desired server, touch Add, then touch
Close.
To change any of the scan settings, touch the four menus at the bottom of the touch screen: Color Scanning,
2-Sided Scanning, Original Type and Scan Presets. For details, see Setting Scan Options.
6.
Press the green Start button.7.
Access the scanned image at your computer.
8.

Xerox 560 Specifications

General

Brand	Xerox
Model	560
Category	Printer
Language	English