Menu Item
Description
Note: Logical page is the space on the physical page where data is
printed.
Auto CR after LF
• Off*
• On
Set the printer to perform a carriage return after a line feed control
command.
Note: Carriage return is a mechanism that commands the printer
to move the position of the cursor to the first position on the same
line.
Auto LF after CR
• Off*
• On
Set the printer to perform a line feed after a carriage return control
command.
Print Timeout
• Disabled
• Enabled*
Enable the printer to end a print job after it has been idle for the
specified amount of time in seconds.
Print Timeout Time
1–255 (90*)
Set the time in seconds for the printer to end a print job after it has been
idle.
Note: This menu item appears only when Print Timeout is
enabled.
Note: An asterisk (*) next to a value indicates the factory default setting.
IImmaaggee
Menu Item
Description
Auto Fit
• On
• Off*
Select the best available paper size and orientation setting for an
image.
Note: When set to On, this menu item overrides the
scaling and orientation settings for the image.
Invert
• Off*
• On
Invert bitonal monochrome images.
Note: This menu item does not apply to GIF or JPEG
image formats.
Scaling
• Anchor Top Left
• Best Fit*
• Anchor Center
• Fit Height/Width
• Fit Height
• Fit Width
Adjust the image to fit the printable area.
Note: When Auto Fit is set to On, Scaling is automatically
set to Best Fit.
Xerox
®
B230 Printer
User Guide
67
Use printer menus
To Next Page
Loading...
Need help?
General