Paper
TTrraayy CCoonnffiigguurraattiioonn
Menu Item
Description
Default Source
• Tray [x] (1*)
• Manual Paper
• Manual Envelope
Set the paper source for all print jobs.
Paper Size/Type
• Tray [x] (1*)
• Manual Paper
• Manual Envelope
Specify the paper size or paper type loaded in each paper source.
Substitute Size
• Off
• Letter/A4
• All Listed*
Set the printer to substitute a specified paper size if the requested size is not
loaded in any paper source.
• Off prompts the user to load the required paper size.
• Letter/A4 prints an A4-size document on letter when loading letter, and
letter-size jobs on A4 paper size when loading A4.
• All Listed substitutes Letter/A4.
Note: An asterisk (*) next to a value indicates the factory default setting.
MMeeddiiaa CCoonnffiigguurraattiioonn
UUnniivveerrssaall SSeettuupp
Menu Item
Description
Units of Measure
• Inches
• Millimeters
Specify the unit of measurement for the universal paper.
Note: Inches is the U.S. factory default setting. Millimeters is
the international factory default setting.
Portrait Width
• 3.00–14.17inches (8.50*)
• 76–360mm (216*)
Set the portrait width of the universal paper.
Portrait Height
• 3.00–14.17inches (14*)
• 76–360mm (356*)
Set the portrait height of the universal paper.
Xerox
®
B230 Printer
User Guide
69
Use printer menus