Media Types
ColorQube 9301/9302/9303 Multifunction Printer
User Guide
179
Media Types
This section describes the different types of media that can be loaded in the printer. For further
information about media types and specifications, refer to
www.xerox.com/paper.
The Type can be selected from a drop-down menu for the adjustable trays. It is important to select the
correct Type setting for the media loaded in each tray. The printer can detect different types of media
as it travels through the paper path, and the printer halts a job if a mismatch occurs.
The following media types are supported:
•Plain
•Pre-punched
• Transparency
•Pre-printed
•Recycled Paper
•Labels
• Heavyweight
• Extra Heavyweight
•Pre-Cut Tabs
•Envelopes
Plain
This media type is used for plain and colored paper, as well as a lightweight card. It is also the type
used when loading carbonless paper.
The following paper types are not recommended:
•Coated paper
• Conductive paper
• Paper containing talc
• Highly glossy paper
• Paper containing wax, stearate, or plasticizer
Pre-Punched
This media type is used for hole-punched media that has two or more holes along one edge for use in
ring binders and notebooks. To ensure ink is not placed where the holes occur, a small deletion is
applied to the binding edge of the image.
To Next Page
Loading...
Need help?
General
