Xerox Phaser 4620 User Manual

5/2011
3-8
Phaser 4600/4620 Printer Service Manual
IQ6
Revision - Xerox Internal Use Only
Image Quality
IQ6 Light or Undertoned Print
The overall image density is too light.
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Initial Actions
• Inspect the paper path for items, such as staples, paper clips, and paper scraps.
• Check the Drum Cartridge life counter. If at end of life, replace the Drum Cartridge.
• Check that the Drum Cartridge electrical contact points are clean.
• Ensure that there are no obstructions in the laser path.
• Ensure that draft mode is turned Off.
Figure 1 Light or undertone print example
Procedure
Check the paper condition. Load new, dry recommended paper, and print a test print. The
image is too light.
YN
Perform SCP 6 Final Actions.
Replace the Drum Cartridge and reprint the test print. The image is too light.
YN
Perform SCP 6 Final Actions.
Remove the Transfer Roller and check for surface contamination or excessive wear. The
Transfer Roller is good.
YN
Replace the Transfer Roller, REP 9.1.
Remove the Drum Cartridge, clean the electrical contacts, then print a test print. The image
is too light.
YN
Perform SCP 6 Final Actions.
Print a test print. While the print is printing, turn off system power. Remove the Drum Cartridge
and check the image formed on the drum right before the Transfer Roller. The image is
poorly formed, faint and difficult to read.
YN
Check the image formed on the drum, right after the Transfer Roller. The image is com-
pletely transferred to the paper
YN
Replace the Transfer Roller, REP 9.1.
Continue with the procedure.
Replace the HVPS, REP 1.4, and print a test print. The images is too light.
YN
Perform SCP 6 Final Actions.
Replace the MCU Board, REP 3.4. The image is too light.
YN
Perform SCP 6 Final Actions.
Replace the IP Board, REP 3.6.
A
A

Xerox Phaser 4620 Specifications

General

Operating temperature (T-T)	50 - 90 °F
Operating relative humidity (H-H)	20 - 80 %
Color	No
I/O ports	10/100/1000 BaseT Ethernet, USB 2.0
Depth (min)	541 mm
Height (min)	420 mm
Minimum width	476 mm
Minimum weight	34.6 kg
Package length	698.49 mm
Print technology	Laser printing
Mac compatibility	Yes
Security features	Audit log, HTTPS, Image overwrite security, IP filtering, IPSec, Network authentication, SNMPv3, 802.1x
Storage drive type	Optional
Print memory (standard)	256 MB
Power consumption (active)	900 W
Minimum storage drive space	160 GB
Power consumption (standby)	93 W
Power consumption (PowerSave)	10 W
Storage media	HDD
Maximum internal memory	768 MB
Sound power level (standby)	39 dB
PCL fonts	93
Certification	Class 1 Laser Product, CE Marked, EMC Directive 89/336/EEC, EN 55022 Class B, EN 55024, FCC Part 15, Class B, Low Voltage Directive 73/23/EEC, RoHS Directive 2002/95/EC
Country of origin	China
Maximum duty cycle	275000 pages per month
Number of PostScript fonts	136
Number of print cartridges	1
Total input capacity	550 sheets
Total output capacity	500 sheets
Maximum input capacity	2000 sheets
Multi-Purpose tray input capacity	100 sheets
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	7.8 s
Print speed (black, normal quality, A4/US Letter)	65 ppm
Display	LCD
Package weight	40200 g
Maximum print size	216 x 356 mm
Paper tray media types	Bond paper, Card stock, Labels, Pre-Printed, Recycled paper, Transparencies
ISO A-series sizes (A0...A9)	A4
Standard interfaces	USB 2.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Export Control Classification Number (ECCN)	EAR99

Weight and Dimensions

Width	627.37 mm
Height	685.79 mm
Dimensions (WxDxH)	476 x 420 x 541 mm