5/2011
4-19
Phaser 4600/4620 Printer Service Manual
REP 4.1
Repairs
Revision - Xerox Internal Use Only
REP 4.1 Main Drive Assembly
Parts List on PL 4.10 Item 1
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Remove Tray 2.
2. Remove the Duplex Unit, REP 10.1.
3. Remove the IP Board Cover, REP 28.1.
4. Remove the Right Cover, REP 28.2.
5. Disconnect 4 connections from the Main Drive Assembly, Figure 1.
6. Release the harnesses from 4 harness clamps, Figure 1.
Figure 1 Disconnect the Main Drive Assembly
7. Disconnect the USB cable from the Front Cover.
8. Raise the Top Door.
9. Release the top door linkage from the Main Drive Assembly, Figure 2.
Figure 2 Disconnect Top Door linkage from the Main Drive Assembly
10. Remove 6 screws (1 silver, 5 gold) that secure the Main Drive Assembly to the chassis,
Figure 3.