Xerox Phaser 4620 User Manual

5/2011
2-67
Phaser 4600/4620 Printer Service Manual
12-925-00, 12-935-00, 12-945-00, 12-955-00
Status Indicator RAPS
Revision - Xerox Internal Use Only
12-925-00, 12-935-00 Upper Diverter Fault Home RAP
12-925-00 The Mailbox upper diverter did not move from home position.
12-935-00 The Mailbox upper diverter did not move to home position.
BSD-Reference: WD 18
Initial Actions
• Open, then close the Mailbox Rear Door.
• Cycle system power.
Procedure
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Cycle system power. The error message is displayed.
YN
Complete.
Select dC330 code 12-925 to test the upper diverter home position sensor. The sensor sig-
nal changes (high/low).
YN
Remove the Mailbox, GP 14 to check the condition of the Mailbox option connector and
harness. The connector and harness are undamaged.
YN
Repair the harness.
Remove the Mailbox right cover and reseat P/J3 on the Mailbox Control Board. The
error message is displayed.
YN
Reassembly and perform SCP 6 Final Actions.
Replace the Mailbox Control Board, REP 11.5.
Select dC330 code 12-935 to test the Mailbox Upper Diverter Drive Assembly, PL 11.25 Item
1. The motor rotates (on/off).
YN
Check the Upper Diverter Drive Assembly connections and harness (REP 11.7). Repair or
reconnect as necessary.
Replace these components in order until the error is corrected.
1. IOT Upper Option Harness, PL 10.30 Item 24
2. MCU Board, PL 3.10 Item 3
12-945-00, 12-955-00 Lower Diverter Fault Home RAP
12-945-00 The Mailbox lower diverter did not move from home position.
12-955-00 The Mailbox lower diverter did not move to home position.
BSD-Reference: WD 18
Initial Actions
• Open, then close the Mailbox Rear Door.
• Cycle system power.
Procedure
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Cycle system power. The error message is displayed.
YN
Complete.
Select dC330 code 12-945 to test the lower diverter home position sensor. The sensor sig-
nal changes (high/low).
YN
Remove the Mailbox, GP 14 to check the condition of the Mailbox option connector and
harness. The connector and harness are undamaged.
YN
Repair the harness.
Remove the Mailbox right cover and reseat P/J3 on the Mailbox Control Board. The
error message is displayed.
YN
Reassembly and perform SCP 6 Final Actions.
Replace the Mailbox Control Board, REP 11.5.
Select dC330 code 12-955 to test the Mailbox Lower Diverter Drive Assembly, PL 11.25 Item
1. The motor rotates.
YN
Check the Lower Diverter Drive Assembly connection and harness (REP 11.7). Repair or
reconnect as necessary.
Replace these components in order until the error is corrected.
1. IOT Upper Option Harness, PL 10.30 Item 24
2. MCU Board, PL 3.10 Item 3

Xerox Phaser 4620 Specifications

General

Operating temperature (T-T)	50 - 90 °F
Operating relative humidity (H-H)	20 - 80 %
Color	No
I/O ports	10/100/1000 BaseT Ethernet, USB 2.0
Depth (min)	541 mm
Height (min)	420 mm
Minimum width	476 mm
Minimum weight	34.6 kg
Package length	698.49 mm
Print technology	Laser printing
Mac compatibility	Yes
Security features	Audit log, HTTPS, Image overwrite security, IP filtering, IPSec, Network authentication, SNMPv3, 802.1x
Storage drive type	Optional
Print memory (standard)	256 MB
Power consumption (active)	900 W
Minimum storage drive space	160 GB
Power consumption (standby)	93 W
Power consumption (PowerSave)	10 W
Storage media	HDD
Maximum internal memory	768 MB
Sound power level (standby)	39 dB
PCL fonts	93
Certification	Class 1 Laser Product, CE Marked, EMC Directive 89/336/EEC, EN 55022 Class B, EN 55024, FCC Part 15, Class B, Low Voltage Directive 73/23/EEC, RoHS Directive 2002/95/EC
Country of origin	China
Maximum duty cycle	275000 pages per month
Number of PostScript fonts	136
Number of print cartridges	1
Total input capacity	550 sheets
Total output capacity	500 sheets
Maximum input capacity	2000 sheets
Multi-Purpose tray input capacity	100 sheets
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	7.8 s
Print speed (black, normal quality, A4/US Letter)	65 ppm
Display	LCD
Package weight	40200 g
Maximum print size	216 x 356 mm
Paper tray media types	Bond paper, Card stock, Labels, Pre-Printed, Recycled paper, Transparencies
ISO A-series sizes (A0...A9)	A4
Standard interfaces	USB 2.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Export Control Classification Number (ECCN)	EAR99

Weight and Dimensions

Width	627.37 mm
Height	685.79 mm
Dimensions (WxDxH)	476 x 420 x 541 mm