Xerox Phaser 4620 User Manual

5/2011
2-20
Phaser 4600/4620 Printer Service Manual
04-400-00, 04-500-00
Revision - Xerox Internal Use Only
Status Indicator RAPS
Test Lift Motor operation in the affected Feeder. The Lift Motor rotates.
YN
Remove the Right Cover (REP 7.25), reseat CN2 on the Feeder Board, then retest. The
Lift Motor rotates.
YN
Check the Feeder Upper Option Harness. The harness is undamaged.
YN
Repair or replace the harness, REP 7.31.
Replace the Lift Motor, REP 7.7, then retest. The Lift Motor rotates.
YN
Replace the Feeder Board, REP 7.28.
Reassemble and perform SCP 6 Final Actions.
Reassemble and perform SCP 6 Final Actions.
Replace these components in order until the error is corrected.
1. Tray, PL 7.10 Item 23
2. Feeder Board, PL 8.30 Item 7
3. MCU Board, PL 3.10 Item 3
04-500-00 Main Motor Failure RAP
04-500-00 An error occurred in the Main Drive Assembly.
BSD-Reference: WD 5
Initial Actions
• Close the Top Door.
• Check for obstructions blocking the latch.
Procedure
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
CAUTION
Cover the Drum Cartridge to prevent light exposure.
Cycle system power. The error message is displayed.
YN
Perform SCP 6 Final Actions.
Select dC330 code 04-100. All motors rotate.
YN
Remove the Right Cover (REP 7.25), reseat CN5 and CN9 on the MCU Board, then
retest. All motors rotate.
YN
Manually rotate the motors. The motors turn freely.
YN
Remove the Toner and Drum Cartridges and manually rotate the motors. The
motors turn freely.
YN
Replace the Main Drive Assembly, REP 4.1,
Replace the affected cartridge.
Check the Main Drive Assembly harnesses. The harnesses are undamaged.
YN
Repair the harness.
Replace the Main Drive Assembly, REP 4.1, then retest. All motors rotate.
YN
Replace the MCU Board, REP 3.4.
Reassemble and perform SCP 6 Final Actions.
Reassemble and perform SCP 6 Final Actions.
Replace these components in order until the error is corrected.
1. MCU Board, PL 3.10 Item 3
2. HVPS, PL 1.10 Item 1
A

Xerox Phaser 4620 Specifications

General

Operating temperature (T-T)	50 - 90 °F
Operating relative humidity (H-H)	20 - 80 %
Color	No
I/O ports	10/100/1000 BaseT Ethernet, USB 2.0
Depth (min)	541 mm
Height (min)	420 mm
Minimum width	476 mm
Minimum weight	34.6 kg
Package length	698.49 mm
Print technology	Laser printing
Mac compatibility	Yes
Security features	Audit log, HTTPS, Image overwrite security, IP filtering, IPSec, Network authentication, SNMPv3, 802.1x
Storage drive type	Optional
Print memory (standard)	256 MB
Power consumption (active)	900 W
Minimum storage drive space	160 GB
Power consumption (standby)	93 W
Power consumption (PowerSave)	10 W
Storage media	HDD
Maximum internal memory	768 MB
Sound power level (standby)	39 dB
PCL fonts	93
Certification	Class 1 Laser Product, CE Marked, EMC Directive 89/336/EEC, EN 55022 Class B, EN 55024, FCC Part 15, Class B, Low Voltage Directive 73/23/EEC, RoHS Directive 2002/95/EC
Country of origin	China
Maximum duty cycle	275000 pages per month
Number of PostScript fonts	136
Number of print cartridges	1
Total input capacity	550 sheets
Total output capacity	500 sheets
Maximum input capacity	2000 sheets
Multi-Purpose tray input capacity	100 sheets
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	7.8 s
Print speed (black, normal quality, A4/US Letter)	65 ppm
Display	LCD
Package weight	40200 g
Maximum print size	216 x 356 mm
Paper tray media types	Bond paper, Card stock, Labels, Pre-Printed, Recycled paper, Transparencies
ISO A-series sizes (A0...A9)	A4
Standard interfaces	USB 2.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Export Control Classification Number (ECCN)	EAR99

Weight and Dimensions

Width	627.37 mm
Height	685.79 mm
Dimensions (WxDxH)	476 x 420 x 541 mm