Xerox Phaser 4620 User Manual

5/2011
2-25
Phaser 4600/4620 Printer Service Manual
07-210-00, 07-220-00
Status Indicator RAPS
Revision - Xerox Internal Use Only
07-210-00 Paper Empty at Tray 3 RAP
07-210-00 The Tray 3 No Paper indicates the Tray is empty.
BSD-Reference: WD 3
Initial Actions
1. Add media to the Tray.
2. Check the No Paper Sensor Actuator.
3. Check for obstruction of the Pick mechanism.
Procedure
WARNING
Use safe handling procedures when removing the module. Refer to GP 15. The module
is heavy.
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Check the Tray 3 No Paper Sensor Actuator. The actuator is undamaged and motion is
good.
YN
Repair or replace the Tray 3 No Paper Sensor Actuator.
Select dC330 code 07-310 to test the sensor. The sensor signal changes (high/low).
YN
Remove the IOT, from the Feeder and check the Upper Option Harness, PL 8.30 Item 10.
The harness is undamaged.
YN
Replace the harness, REP 7.31.
Check the IOT Lower Option Harness. The harness is undamaged.
YN
Replace the IOT Lower Option Harness, REP 10.5.
Replace the Tray 3 No Paper Sensor (REP 7.35), then retest. The sensor signal
changes.
YN
Remove the Right Cover (REP 28.2) and reseat CN3 on the Feeder Board, then
retest. The sensor signal changes.
YN
Replace the MCU Board, REP 3.4.
Reassemble and perform SCP 6 Final Actions.
Reassemble and perform SCP 6 Final Actions.
Replace the MCU Board, REP 3.4.
07-220-00 Tray 3 is Open RAP
07-220-00 The Size Switch indicates the Tray is not fully installed.
BSD-Reference: WD 3
Initial Actions
1. Close the Tray.
2. Check the Size Switch.
Procedure
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Cycle system power. The error message is displayed.
YN
Complete.
Remove Tray 3 and inspect the Size Switch. The Size Switch is undamaged.
YN
Replace the Size Switch, REP 7.30, then retest.
Select dC330 code 07-300 to test the switch. The switch signals change (open/closed).
YN
Remove the Right Cover (REP 28.2) and reseat CN5 on the Feeder Board, then retest.
The sensor signal changes.
YN
Replace the Feeder Board, REP 7.28.
Reassemble and perform SCP 6 Final Actions.
Replace these components in order until the error is corrected.
1. Size Switch, PL 8.30 Item 9
2. Feeder Board, PL 8.30 Item 7
3. MCU Board, PL 3.10 Item 3

Xerox Phaser 4620 Specifications

General

Operating temperature (T-T)	50 - 90 °F
Operating relative humidity (H-H)	20 - 80 %
Color	No
I/O ports	10/100/1000 BaseT Ethernet, USB 2.0
Depth (min)	541 mm
Height (min)	420 mm
Minimum width	476 mm
Minimum weight	34.6 kg
Package length	698.49 mm
Print technology	Laser printing
Mac compatibility	Yes
Security features	Audit log, HTTPS, Image overwrite security, IP filtering, IPSec, Network authentication, SNMPv3, 802.1x
Storage drive type	Optional
Print memory (standard)	256 MB
Power consumption (active)	900 W
Minimum storage drive space	160 GB
Power consumption (standby)	93 W
Power consumption (PowerSave)	10 W
Storage media	HDD
Maximum internal memory	768 MB
Sound power level (standby)	39 dB
PCL fonts	93
Certification	Class 1 Laser Product, CE Marked, EMC Directive 89/336/EEC, EN 55022 Class B, EN 55024, FCC Part 15, Class B, Low Voltage Directive 73/23/EEC, RoHS Directive 2002/95/EC
Country of origin	China
Maximum duty cycle	275000 pages per month
Number of PostScript fonts	136
Number of print cartridges	1
Total input capacity	550 sheets
Total output capacity	500 sheets
Maximum input capacity	2000 sheets
Multi-Purpose tray input capacity	100 sheets
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	7.8 s
Print speed (black, normal quality, A4/US Letter)	65 ppm
Display	LCD
Package weight	40200 g
Maximum print size	216 x 356 mm
Paper tray media types	Bond paper, Card stock, Labels, Pre-Printed, Recycled paper, Transparencies
ISO A-series sizes (A0...A9)	A4
Standard interfaces	USB 2.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Export Control Classification Number (ECCN)	EAR99

Weight and Dimensions

Width	627.37 mm
Height	685.79 mm
Dimensions (WxDxH)	476 x 420 x 541 mm