3-6 Phaser 6280 Color Laser Printer Service Manual
Error Messages and Codes
Error Message and Chain Link Code Summary
The Error Message Summary table lists possible errors, along with the
corresponding code, and page reference for the corrective procedure.
â– The Control Panel Message column shows the message as it appears on
the printer’s display when the error codes during normal operation.
â– The Chain Link column lists codes listed on the printer Error History
Report and the Control Panel.
â– The Go to Page column references the procedure related to the error.
Use this table to identify the proper procedure to correct the reported error.
Error Message and Chain Link Code Display
Chain Link
Code
Control Panel Message Go to Page
Jam Errors
071-100 Jam at Tray 2 (Feeder 1 Jam) page 3-11
072-100 Jam at Tray 3 (Feeder 2 Jam) page 3-14
075-100 Jam at Tray 1 (MPT) page 3-20
077-100 Jam at Registration Roll (IOT Regi 1 Jam) page 3-24
077-101 Jam at Registration Roll (IOT Regi 2 Jam) page 3-24
077-102 Jam at Exit 1/Exit 2 (IOT Exit 1 Jam) page 3-27
077-103 Jam at Exit 1/Exit 2 (IOT Exit 2 Jam) page 3-27
077-104 Jam at Duplex (IOT Duplex 1 Jam) page 3-30
077-105 Jam at Duplex (IOT Duplex 2 Jam) page 3-35
077-106 Jam at Duplex (IOT Duplex 3 Jam) page 3-35
077-107 Jam at Duplex (IOT Duplex 4 Jam) page 3-30
077-900 Jam at Registration Roll/Jam at Exit page 3-39
077-901 Jam at Registration Roll/Jam at Exit page 3-39
077-903 Jam at Tray 2 (IOT Feed Jam) page 3-45
077-907 Jam at Duplexer (IOT Remain Duplex Jam) page 3-47
Consumable/Routine Maintenance Errors
010-317 Insert Fuser page 3-51
010-351 Replace Fuser page 3-53
010-359 Fuser CRUM ID Error page 3-54
010-397 Fuser Error page 3-55
010-421 Ready Fuser Life page 3-57