Xerox Phaser 6280 Service Manual

8-36 Phaser 6280 Color Laser Printer Service Manual
Service Parts Disassembly
Tray 2 Feeder Assembly (PL3.2.1)
1. Remove the Rear Cover (page 8-12).
2. Remove the Right Side Cover (page 8-13).
3. Remove the PH Drive Assembly (page 8-73).
4. Remove the Registration Clutch (page 8-40).
5. Remove the Feed Clutch (page 8-41).
6. Remove the Tray 1 (MPT) Roll (page 8-32).
Note
It is not necessary to remove the Tray 1 (MPT) No Paper Sensor
(PL3.1.15) and the Cover Sensor (PL3.1.16).
7. Remove 2 screws (10 mm) securing the MPT Chute (PL3.1.14) to the
printer.
8. Move the MPT Chute to the side away from the Feeder Assembly.
s6280-195

Xerox Phaser 6280 Specifications

General

Brand	Xerox
Model	Phaser 6280
Category	Printer
Language	English