10-6 Phaser 6280 Color Laser Printer Service Manual
Plug/Jack and Wiring Diagrams
Duplex Plug/Jack Designators
502 4 F-149 Connects the LVPS and the Top Low Voltage
Harness.
503 4 F-149 Connects the LVPS and the Main Fan.
504 4 F-149 Connects the LVPS and the Top Low Voltage
Harness.
2411 2 F-125 Connects the Feeder Assembly (TEN Sensor PWBA)
and the TEN Sensor Harness.
2721 1 B-107 Connects the Transfer Unit and the Front Cover
Harness.
2821 1 E-110 Connects the No Paper Sensor and the NPP
Harness.
2900 1 I-110 Connects the Control Panel Harness and the
Controller Harness.
2921 2 D-125 Connects the Feeder Assembly (No Paper Sensor)
and the Regi Sensor Harness.
2922 2 E-125 Connects the Feeder Assembly (Regi Sensor) and
the Regi Sensor Harness.
5041 3 D-106 Connects the ADC Sensor and Belt Harness
(Transfer Assembly).
27212 1 D-107 Connects ADC Sensor and Transfer Unit Harness.
27213 1 D-107 Connects the ADC Solenoid and the Belt Harness
(Transfer Assembly).
Duplex Plug/Jack Designators
P/J Map Coordinates
Remarks
1 5 E-168 Not connected (Debug only).
427 5 F-168 Connects the Duplex Board and the Duplex Fan.
428 5 F-168 Connects the Duplex Board and the Duplex Unit
Harness.
429 5 F-169 Connects the Duplex Board and the Duplex Motor.
430 5 F-168 Connects the Duplex Board and the Duplex Sensor
Harness.
431 5 F-168 Connects Duplex Board and Duplex Clutch.
2720 5 I-169 Connects the Duplex Unit (Duplex Unit Harness)
and the printer.
4301 5 E-167 Connects the Duplex Jam Sensor and the Duplex
Sensor Harness.
Print Engine Plug/Jack Designators (continued)
P/J Map Coordinates
Remarks
To Next Page
Loading...
Need help?
General