Xerox Phaser 6280 Service Manual

Phaser 6280 Color Laser Printer Service Manual 10-5
Plug/Jack and Wiring Diagrams
231 2 I-124 Connects the Regi Clutch and the Right Side
Harness.
232 2 H-124 Connects Feeder Assembly (PH Turn Clutch
Assembly) and the Right Side Harness.
233 2 H-123 Connects the Feed Clutch and the Right Side
Harness.
234 1 H-111 Connects the Feed Solenoid and the Right Side
Harness.
235 1 H-107 Connects the Main Drive Assembly (Exit Clutch) and
the Right Side Harness.
241 1 I-109 Connects the K Drive Assembly (K Mode Solenoid)
and the Right Side Harness.
251 1 H-110 Connects the PH Drive Assembly (Tray 2 Motor)
with the Right Side Harness.
261 4 H-152 Connects the Humidity Sensor and the Humidity
Harness.
272 1 I-110 Connects the Front Cover Harness and the Right
Side Harness.
281 2 H-126 Connects the Right Side Harness and the Optional
550-Sheet Feeder (Feeder Unit Harness).
282 1 I-109 Connects the NPP Harness and the Right Side
Harness.
291 2 I-125 Connects the Size Switch Assembly and the Right
Side Harness.
292 2 H-125 Connects the Feeder Assembly (Regi Sensor
Harness) and the Right Side Harness.
301 2 H-124 Connects the Feeder Assembly (TEN Sensor
Harness) and the Right Side Harness.
311 2 G-124 Connects the CRUM Sensor (Y) and the CRUM
Harness.
312 2 G-123 Connects the CRUM Sensor (M) and the CRUM
Harness.
313 2 G-122 Connects the CRUM Sensor (C) and the CRUM
Harness.
314 2 G-122 Connects the CRUM Sensor (K) and the CRUM
Harness.
401 3 F-138 Connects the Image Processor Board and the Top
Low Voltage Harness.
482 4 E-153 Connects the GFI Inlet Breaker and the AC IN
Harness.
483 4 E-154 Connects the GFI Inlet Breaker and the AC IN
Harness.
501 4 F-149 Connects the LVPS and the Top Low Voltage
Harness.
Print Engine Plug/Jack Designators (continued)
P/J Map Coordinates
Remarks

Xerox Phaser 6280 Specifications

General

Brand	Xerox
Model	Phaser 6280
Category	Printer
Language	English