Xerox Phaser 6280 Service Manual

4-68 Phaser 6280 Color Laser Printer Service Manual
General Troubleshooting
Printer Continually Displays Insert Print Cartridge
Initial Actions
■ Check the Print Cartridge life using CentreWare IS.
■ Cycle printer power.
■ If problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts Wiring and Plug/Jack Map References
■ Print Cartridge Sensor, PL5.1.4
■ Print Cartridge (Y/M/C/K),
PL5.1.18-21
■ MCU Board, PL9.1.20
■ Toner Sensor Harness, PL10.1.9
■ “Map 2 - Laser Unit, Feeder Assembly”
on page 10-10
■ “Map 4 - LVPS and MCU Boards” on
page 10-12
■ “Developer” on page 10-33
Troubleshooting Procedure Table
Step Actions and Questions Yes No
1 1. Check the Print Cartridge for correct
installation.
2.Is the Print Cartridge correctly installed?
Go to step 3. Reseat the
Print
Cartridge
(
page 8-10).
2 Does the error still occur? Go to step 3. Complete.
3 1. Replace the Print Cartridge (page 8-10).
2.Does the error still occur?
Go to step 4. Complete.
4 1. Perform the CRU Sensor test: Service
Mode > Sensor Test > CRU Sensor.
■ Yellow CRU Sensor (page 4-32)
■ Magenta CRU Sensor (page 4-33)
■ Black CRU Sensor (page 4-34)
■ Cyan CRU Sensor (page 4-35)
2.Does the number on the Control Panel
increase by 1 when the Print Cartridge is
reseated?
Replace the
MCU Board
(
page 8-86).
Go to step 5.
5 1. Check the Toner Sensor wiring harness
connectors between the Print Cartridge
Sensor and the MCU Board.
■ Yellow: P/J19 and P/J191
■ Magenta: P/J19 and P/J192
■ Black: P/J19 and P/J193
■ Cyan: P/J19 and P/J194
2.Are the connectors securely connected?
Go to step 6. Reconnect
the
connectors.
Go to step 6.
6 Does the error still occur? Go to step 7. Complete.

Xerox Phaser 6280 Specifications

General

Brand	Xerox
Model	Phaser 6280
Category	Printer
Language	English