Xerox Phaser 6280 Service Manual

Phaser 6280 Color Laser Printer Service Manual 4-65
General Troubleshooting
Control Panel Troubleshooting
Printer Does Not Come to a “Ready” State
1. Remove and reseat the Image Processor Board (page 8-87).
2. Refer to “DC Power Supply Troubleshooting” on page 4-71.
3. Replace the Control Panel (page 8-21).
4. Replace the Control Panel wiring harness (page 8-21).
Control Panel LED is On, Control Panel Display is Blank
1. Remove and reseat the Image Processor Board (page 8-87).
2. Replace the Control Panel (page 8-21).
3. Replace the Control Panel wiring harness (page 8-21).
4. Replace the Image Processor Board (page 8-87).

Xerox Phaser 6280 Specifications

General

Brand	Xerox
Model	Phaser 6280
Category	Printer
Language	English