Clearing Staple Jams
CLEARING STAPLE JAMS IN THE INTEGRATED OFFICE FINISHER
CCaauuttiioonn:: Do not perform this procedure while the printer is printing.
1. Open the finisher front door.
2. To remove the staple cartridge, grasp the orange handle, then pull it firmly toward you.
3. Check inside the finisher for any loose staples, then remove the staples.
4. To open the clamp to gain access to the jammed staples, pull the clamp in the direction shown.
236 Xerox
®
VersaLink
®
B71XX Series Multifunction Printer User Guide
Troubleshooting