Fax Regulations
UNITED STATES
Fax Send Header Requirements
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other
electronic device, including a fax machine, to send any message unless such message clearly contains in a margin
at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent
and an identification of the business or other entity, or other individual sending the message and the telephone
number of the sending machine or such business, other entity, or individual. The telephone number provided may
not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.
For instructions on programming the Fax Send Header information, refer to the section of the System Administrator
Guideon Setting Transmission Defaults.
Data Coupler Information
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the Administrative Council
for Terminal Attachments (ACTA). On the cover of this equipment is a label that contains, among other information,
a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the Telephone
Company.
A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with
the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular
plug is provided with this product. It connects to a compatible modular jack that is also compliant. See installation
instructions for details.
You can safely connect the printer to the following standard modular jack: USOC RJ-11C using the compliant
telephone line cord (with modular plugs) provided with the installation kit. See installation instructions for details.
The Ringer Equivalence Number (REN) is used to determine the number of devices that can be connected to a
telephone line. Excessive RENs on a telephone line could result in the devices not ringing in response to an incoming
call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices
that can be connected to a line, as determined by the RENs, contact the local Telephone Company. For products
approved after July 23, 2001, the REN is part of the product identifier that has the format US:AAAEQ##TXXXX. The
digits represented by ## are the REN without a decimal point (for example, 03 is a REN of 0.3). For earlier products,
the REN is separately shown on the label.
To order the correct service from the local Telephone Company, you could also have to quote the codes in the
following list:
• Facility Interface Code (FIC) = 02LS2
• Service Order Code (SOC) = 9.0Y
CCaauuttiioonn:: Ask your local Telephone Company for the modular jack type installed on your line. Connecting
this machine to an unauthorized jack can damage telephone company equipment. You, not Xerox,
assume all responsibility and/or liability for any damage caused by the connection of this machine to an
unauthorized jack.
278
Xerox
®
VersaLink
®
B71XX Series Multifunction Printer User Guide
Regulatory Information
To Next Page
Loading...
Need help?
General
