Xerox WorkCentre 3345 User Manual

OOuuttppuutt AAddjjuussttmmeennttss
RReedduucciinngg oorr EEnnllaarrggiinngg tthhee IImmaaggee
You can reduce the image to as little as 25% of its original size or enlarge it as much as 400%.
To reduce or enlarge the image:
1. At the printer control panel, press the Services Home button.
2. Touch Copy.
3. On the Copy tab, touch the Right arrow.
4. Touch Reduce/Enlarge.
5. Touch an option.
• To reduce or enlarge the percentage incrementally, touch Plus (+) or Minus (-).
• To reduce or enlarge the percentage incrementally, touch the arrows.
• To reduce or enlarge the percentage using the alphanumeric keypad, touch the current
displayed value, then enter a value.
• Touch OK.
6. Touch OK.
EErraassiinngg tthhee EEddggeess ooff CCooppiieess
You can erase content from the edges of your copies by specifying the amount to erase on the right,
left, top, and bottom edges.
1. At the printer control panel, press the Services Home button.
2. Touch Copy.
3. On the Copy tab, touch the Right arrow.
4. Scroll down to and touch Edge Erase.
5. Select an option.
6. Touch OK.
PPaaggee LLaayyoouutt
You can use Page Layout to place a defined number of pages on one or both sides of the paper.
Note: Page Layout is disabled unless a preset Original Size is selected.
1. At the printer control panel, press the Services Home button.
2. Touch Copy.
3. On the Copy tab, touch the Right arrow.
4. Scroll down to and touch Page Layout.
5. Touch an option.
6. For Paper Supply, touch the desired tray.
7. Touch OK.
Xerox
®
WorkCentre
®
3335/3345 Multifunction Printer
User Guide
101
Copying

Xerox WorkCentre 3345 Specifications

General

Brand	Xerox
Model	WorkCentre 3345
Category	All in One Printer
Language	English