Operational Safety
Your printer and supplies were designed and tested to meet strict safety requirements. These include
safety agency examination, approval, and compliance with established environmental standards.
Your attention to the following safety guidelines helps to ensure the continued, safe operation of your
printer.
OOppeerraattiioonnaall GGuuiiddeelliinneess
• Do not remove any paper trays while the printer is printing.
• Do not open the doors when the printer is printing.
• Do not move the printer when it is printing.
• Keep hands, hair, neckties, and so on, away from the exit and feed rollers.
• Covers, which require tools for removal, protect the hazard areas within the printer. Do not remove
the protective covers.
Hot Warning: The metallic surfaces in the fuser area are hot. Always use caution when
removing paper jams from this area and avoid touching any metallic surfaces.
OOzzoonnee RReelleeaassee
This printer produces ozone during normal operation. The amount of ozone produced depends on
copy volume. Ozone is heavier than air and is not produced in amounts large enough to harm anyone.
Install the printer in a well-ventilated room.
For more information in the United States and Canada, go to one of the following:
• WorkCentre
®
3335: www.xerox.com/environment
• WorkCentre
®
3345: www.xerox.com/environment
In other markets, contact your local Xerox representative or go to one of the following:
• WorkCentre
®
3335: www.xerox.com/environment_europe
• WorkCentre
®
3345: www.xerox.com/environment_europe
Xerox
®
WorkCentre
®
3335/3345 Multifunction Printer
User Guide
13
Safety
To Next Page
Loading...
Need help?
General
