Xerox WorkCentre 5890 User Manual

August 2015
5-133
Xerox® WorkCentre® 5890 Family
PL 80.15
Parts Lists
PL 80.15 Registration Transport (45-
5
5 ppm)
Item Part Description
1
059K60041 Registration transport assembly
(REP 80.2, ADJ 80.1)
2 – Retainer bracket (Not Spared)
3 130E11430 Wait sensor (Q81-100),
Registration sensor (Q82-150)
(NOTE 2) (REP 80.4)
4 – Registration transport guide (P/O
PL 80.15 Item 1)
5 059K52341 Registration nip assembly
6 028E16630 Snap on washer (M6)
7 – Registration clutch (CL82-070) (P/
O PL 31.12 Item 13) (REP 80.3,
ADJ 80.1, ADJ 40.1)
8 013E36980 Bearing
9 806E18030 Drive roll assembly (REP 80.20)
10 – Jam clearance knob (P/O PL 80.15
Item 1)
11 – Gear (26T) (P/O PL 80.15 Item 1)
12 – Spring arm (P/O PL 80.15 Item 1)
13 – Torsion spring (P/O PL 80.15 Item
1)
14 – Gear (28T) (P/O PL 80.15 Item 1)
15 – Ring pitch (P/O PL 80.15 Item 1)
16 – Black nylon washer (P/O PL 80.15
Item 1)
17 – Gear (22G/28T) (P/O PL 80.15 Item
1) (ADJ 40.1)
18 – Gear (23T) (P/O PL 80.15 Item 1)
(ADJ 40.1)
19 – Gear (22G/20T) (P/O PL 80.15 Item
1)
20 – Drive belt (P/O PL 80.15 Item 1)
(REP 80.21)
21 – Spring arm pin (P/O PL 80.15 Item
1)
22 – Lower bias guide (P/O PL 80.15
Item 1)
23 835E05350 Bias contact (NOTE 1)
24 – Clutch cover (P/O PL 31.12 Item
13)
25 – Drive shaft (P/O PL 80.15 Item 26)
26 – Drive roll repair kit (REF: PL 31.13
Item 9) (W/TAG 051)
NOTE: 1. HFSI. To reset the HFSI count, refer to dC135.
NOTE: 2. Sensor reference Q08-110 may also be seen when
the tray 6 is present.
www MK-Electronic de

Xerox WorkCentre 5890 Specifications

General

Brand	Xerox
Model	WorkCentre 5890
Category	All in One Printer
Language	English