Xerox WorkCentre 5890 User Manual

August 2015
5-140
Xerox® WorkCentre® 5890 Family
PL 80.33
Parts Lists
PL 80.33 Tray 4 Paper Feed Assembly
Item Part Description
1
– Tray 4 paper feed assembly (P/O
PL 31.12 Item 12) (REP 80.31)
2 059K85140 Idler roll assembly (metal shaft)
(REP 80.37)
– – Idler roll assembly (plastic shaft)
(Not Spared) (REP 80.46)
3 130E11610 Tray 4 empty sensor (Q74-
320)(REP 80.42) / Tray 4 feed
sensor (Q81-104) (REP 80.43)/
HCF exit sensor (Q81-108) (NOTE
2)
4 – HCF exit sensor bracket (P/O PL
31.14 Item 10)
5 – Spring (Not Spared)
6 – Tray 4 stack height sensor (Q74-
330) (P/O PL 31.13 Item 17) (REP
70.17)
7 110E21540 Tray 4 over elevate switch
8 – Tray 4 feed motor (MOT81-040) (P/
O PL 80.33 Item 1)
9 – Feed roll assembly (P/O PL 31.13
Item 14) (See NOTE) (REP 80.44)
10 – Nudger roll (P/O PL 80.33 Item 9)
(REP 80.44, ADJ 80.4)
11 – Tray 4 paper guide (P/O PL 80.33
Item 1) (REP 80.46)
12 – Sensor mounting (P/O PL 80.33
Item 1) (REP 80.42, REP 80.43)
13 – Earth cable (P/O PL 80.33 Item 1)
14 – Feed frame assembly (P/O PL
80.33 Item 1) (REP 80.31)
15 – Retard roll (P/O PL 31.13 Item 14)
(See NOTE) (REP 80.44, ADJ
80.3)
16 – Shim (P/O PL 31.13 Item 17)
17 – Nudger roll weight (P/O PL 80.33
Item 9)
18 – Gull wing cover (P/O PL 31.14 Item
3)
19 121E27552 Feed clutch (CL81-043) (REP
80.49)
20 – Bracket (P/O PL 80.33 Item 1)
NOTE: 1.HFSI. To reset the HFSI count, refer to dC135.
NOTE: 2. The HCF exit sensor is part of PL 31.14 Item 10.
www MK-Electronic de

Xerox WorkCentre 5890 Specifications

General

Brand	Xerox
Model	WorkCentre 5890
Category	All in One Printer
Language	English