Xerox WorkCentre 5890 User Manual

August 2015
5-17
Xerox® WorkCentre® 5890 Family
PL 10.12
Parts Lists
PL 10.12 Inverter Decurler Assembly
(
2 of 4)
Item Part Description
1
– Inverter output assembly (P/O PL
10.11 Item 23)
2 – Post fuser gear (20T) (REF: PL
10.15 Item 7)
3 013E36980 Bearing
4 – Dog drive assembly (REF: PL
10.15 Item 6) (REP 10.12)
5 – Idler gear (20T) (REF: PL 10.15
Item 4)
6 – Tri-roll knob (REF: PL 10.15 Item
12)
7 – Inverter gate (Not Spared) (REP
10.11)
8 – Tri-roll shaft (Not Spared) (REP
10.12)
9 006K29971 Post fuser exit roller (W/O TAG
004) (REP 10.12)
– – Post fuser exit roller (P/O PL 10.12
Item 24) (W/TAG 004)
10 – Tri-roll guide (P/O PL 10.11 Item
23) (REP 10.12)
11 – Front gravity finger (P/O PL 10.11
Item 23)
12 – Gravity gate finger (P/O PL 10.11
Item 23)
13 – Rear gravity gate finger (P/O PL
10.11 Item 23) (REP 10.12)
14 – Upper baffle (P/O PL 10.12 Item
22)
15 – Idler roll (P/O PL 10.12 Item 22)
16 – Idler roll shaft (P/O PL 10.12 Item
22)
17 – Spring (P/O PL 10.12 Item 22)
18 – Post fuser jam clearance latch
(REF: PL 10.15 Item 11)
19 – Inverter sensor (Q10-105) (P/O
item 22) (65-90 ppm) (NOTE) (REP
10.20)
20 – Hinge pin (P/O PL 10.12 Item 22)
21 – Torsion spring (P/O PL 10.12 Item
22)
22 038K17843 Upper baffle assembly (45-55 ppm)
(REP 10.7)
– 038K23890 Upper baffle assembly (65-90 ppm)
23 123E02481 Upper LED (REP 10.18)
24 – Inverter transparency feed kit (REF:
PL 31.12 Item 2) (W/TAG 004)
NOTE: The 45-55 ppm machines do not have the inverter
sensor.
www MK-Electronic de

Xerox WorkCentre 5890 Specifications

General

Brand	Xerox
Model	WorkCentre 5890
Category	All in One Printer
Language	English